| View previous topic :: View next topic |
| Author |
Message |
Captain Morgan
Joined: 19 Aug 2005
Posts: 12
|
 Posted: Wed Dec 07, 2005 6:43 pm Post subject: Big block power |
 |
|
| Is anyone using the 540 or the the Hardcore 632 engines. The 540 seems to be the cheeper way to go compared to the ZZ572. I need info
|
|
| Back to top |
|
 |
JR
Joined: 23 Jul 2005
Posts: 81
|
| Posted: Thu Dec 08, 2005 3:32 am Post subject: Re: Big block power |
|
|
| Captain Morgan wrote: | | Is anyone using the 540 or the the Hardcore 632 engines. The 540 seems to be the cheeper way to go compared to the ZZ572. I need info |
Try this link
http://www.nzjetboating.com/yabbse/index.php?topic=6051.0
But this one went bang.. Cheers JR
|
|
| Back to top |
|
|
Clark
Joined: 17 Jun 2005
Posts: 20
Location: Cotton Tree
|
| Posted: Thu Dec 08, 2005 3:42 am Post subject: Re: Big block power |
|
|
JR, that engine has not turned one revolution in anger yet. It will be running for new season starting in January. It's only a small block, but it is 540 cubes. I understand the largest small block ever built. If I had a spare couple of hundred "k" I'd buy one for my lounge. It's an amazing engine!
_________________
Clark
www.nzjetboating.com |
|
| Back to top |
|
|
MidwetJetSprint
Joined: 29 Jul 2005
Posts: 160
Location: Chicago Metro
|
|
| Back to top |
|
|
AR
Joined: 23 Jun 2005
Posts: 181
Location: Iowa, USA
|
| Posted: Thu Dec 08, 2005 9:33 am Post subject: |
|
|
Midwest,
Heres a picture of my 572, but I opted for the Aluminum Block. My spare is in a Bowtie block and on loan to my brother.
| Description: |
|
| Filesize: |
232.03 KB |
| Viewed: |
18837 Time(s) |
|
| Description: |
|
| Filesize: |
246.22 KB |
| Viewed: |
18837 Time(s) |
|
|
|
| Back to top |
|
|
AR
Joined: 23 Jun 2005
Posts: 181
Location: Iowa, USA
|
| Posted: Thu Dec 08, 2005 9:43 am Post subject: |
|
|
That skinny-assed belt in the second picture is his spare that got him to the trailer that day !
Hey, I'm sorry, I won't let it happen again ! If you delete these posts I'll understand .............. Those two boats are not Aluminum ......... But I have seen the light !
|
|
| Back to top |
|
|
Cavefish
Joined: 18 Jun 2005
Posts: 130
Location: Klamath, CA, USA
|
| Posted: Sat Dec 10, 2005 7:54 am Post subject: |
|
|
Holy cow Art! That's some big iron (aluminum)! So the ZZ4 must seem kinda like a lawnmower engine to you?? :D
_________________
-Jesse |
|
| Back to top |
|
|
AR
Joined: 23 Jun 2005
Posts: 181
Location: Iowa, USA
|
| Posted: Sat Dec 10, 2005 8:41 am Post subject: |
|
|
Like my Dad says, it's just a Pony motor !
He's been a Catapiller Endloader operator most of his life and that used to be the little motor that started the big Diesel motor on the old Cat's.
Seriously, that little motor is like the Energizer Bunny, I change oil and put gas in the tanks once in a while. Those big motors, at least mine use about 5 gallons of 105 octane fuel a mile ! And go through valve springs and bearing a couple times a summer if you're very lucky. Not to mention the polish and wax.
Anybody can go Fast in a straight line, just hammer down and hold on ! All it takes is Cubic $$'s.
But that little ZZ4 in an Aluminum boat at 70 mph running up a Beaver Creek thats 10 foot wide is a thrill most people will never experience.
But I do have some SBC pieces for a little more HP !
The speed getting from one creek to the next is still fun too.
Like Wilson says' Wisdom chases me, but I'm faster.....
.
|
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
