OUTLAW EAGLE MANUFACTURING

ravencrew · Joined: 24 Oct 2006 Posts: 216 Location: Brookings Or.

Someone needs to tell Vinny to listen for the whistle. Those boats are had to hear coming, You know when they went by though! Looks Great!

Kev-o · Joined: 17 Jun 2005 Posts: 625 Location: Sylvan Lake

Okay so here is a little update on the Turbines. Waiting on a couple gauges and some fuel fills. We will be mounting oil catch cans and fuel pump and a custom can to deliver air free fuel to heart of the beast. Roll bar in place and ready to tig.

There will be more anodized fittings and stainless braided line than you could find at you average speed shop. plumbing underway and wiring next week then Shocked

Gords is in the pics and John Derry is the lucky owner of Turbine 23 #2, Johns boat is at about the same progress minus half the cage. Both of these units will be about a week apart in tearing up the liquid race tracks.

I will keep you updated with pics and info as they go together

Kev-o

Wocket16 · Joined: 11 May 2010 Posts: 45

Very, very nice and thanks for posting progress pics.
Did the hulls end up wider too?

Jesse

Hines · Joined: 05 Jul 2005 Posts: 304 Location: Red Deer

Get rid of the tire its in the way back of truck lol.Later.

blowin crazy · Joined: 05 Sep 2006 Posts: 42 Location: LOG JAM

what is the latest word on the turbines ,

Hines · Joined: 05 Jul 2005 Posts: 304 Location: Red Deer

Their still in the air lol.Later.

Kev-o · Joined: 17 Jun 2005 Posts: 625 Location: Sylvan Lake

Just got the air intake from Fibre-werx in Sylvan Lake They do great work, Gave them a drawing of what we wanted and they had the mold made and three cranked out for us like that. Anybody needing fibreglass work/repair done these guy's are GOOD!

Anyway the first turbine is almost wired up and plumbed, tanks are fabbed and ready for paint.

Kev-o

Bald Man · Posted: Thu Jun 03, 2010 10:05 am Post subject:

Well aint that cool!!
The first run should be on Sylvan Lake about 20:00 hrs on a nice calm night. That ought to freak out the masses. Shocked

mof · Joined: 23 Jan 2006 Posts: 40 Location: Sydney, Australia

What is fuel consumption on these turbines compared to a big hp unlimited motor - what size tanks are going in?

Coyotitto · Joined: 19 Sep 2005 Posts: 54 Location: Red Deer River

fuel consumption is approx 25% more than an unlimited gas engine 65-70 for the gas 90-95 for the turbine ,factor in about 10% faster speed its not a lot more The boats will have 2-45 gal tanks Hear is another nice fact wholesale jetA price approx 1.00 per litre 410$ per hour wide open. unlimited gas using c-14 last time I checked 295 liters x 3.05=900.55 per hour

Hines · Joined: 05 Jul 2005 Posts: 304 Location: Red Deer

Yes that is a cool intake ,just wondering what would happen if those two chrome tanks spring a leak should never happen in raceing right???. things are lined up perfect lol.LATER

Kev-o · Joined: 17 Jun 2005 Posts: 625 Location: Sylvan Lake

Just painted the tanks and rollbar and some misc. stuff, the boat is now going back together and I will get some pics up this week for you guy's

Kev-o

Kev-o · Joined: 17 Jun 2005 Posts: 625 Location: Sylvan Lake

Pretty close to being wrapped up on this one, then Johns should be done for the following week.

The cover over the turbine is to streamline it a bit and there will be a stainlees wire mesh over each intake opening.

These boats look FANTASTIC Cool

They will both be at the Peace River Race so it would be a great race to get too. Idea

Kev-o

JET1 · Joined: 03 Jun 2010 Posts: 42

will it be racing in grande prairie this weekend or at least make it to the show and shine

Kev-o · Joined: 17 Jun 2005 Posts: 625 Location: Sylvan Lake

Painted and ready for the water pretty much! Need to do some other things like green roll cage & throttle control. This thing looks bad ass Cool

Check out the dump valve on the nozzle Idea

Kev-o