OUTLAW EAGLE MANUFACTURING

dmcamacho · Joined: 20 Jan 2006 Posts: 3 Location: Boise, ID

So I have been spending this winter trying to track down my oil leak. I thought it was the valley between the Intake manifold and Block. So I got some new gaskets and reSealed my intake. No leak there...but now I am BLOWING (looks like Old Faithfull) oil out the Breather Cap when ever I run the motor over 4200RPM.

I suspect I am buildling to much exhaust back pressure but I wanted to get some opinions. Here is my setup:

Custom built SBC 383 with a CompCam Marine Camshaft.
4" Kodiak Exhaust running into a Outlaw Exhaust Collector
Dual 2.5" Exhaust out of the Transom.

Thoughts????

BLOWN INCOME · Posted: Mon Mar 22, 2010 8:31 am Post subject:

Being a mechanic by trade heres my 2 cents...Oil out the breather cap can come from oil being thrown off the rocker arms at higher rpms if you dont have tall v-covers or a splash baffle in your valve covers.Another way to reduce this oil mess is put a pcv(positive crank case ventilation system in, to pull off some of the pressure to reduce this problem.I run a blown smallblock chev and at higher rpms,with a pcv system,i get very little oil out my breathers...try these things and happy RPM,S...

Will R · Joined: 31 Jul 2005 Posts: 677 Location: NWT/Alberta

hahaha flippin vinny...allways lookin for an excuse to show off that purrdy lil blown small block!

Rivernut · Joined: 16 Aug 2009 Posts: 34 Location: Massachusetts

All that HP resting on one Fram oil filter??

boosted · Joined: 04 Jun 2009 Posts: 378

I always run a pcv system and it really keeps the oil under control.

Doogie · Joined: 31 Jan 2010 Posts: 4

Not a lot of Brains in this forum... mostly Drunk, rich Rig pigs who don't have much of a clue. They prefer to brag about there illegal activity's!
Maybe they will get fined like these Idiots driving there truck through the river in a restricted area and then Posting it on Youtube!!

http://edmonton.ctv.ca/servlet/an/local/CTVNews/20100323/edm_truck_100323/20100323/?hub=EdmontonHome

Sorry I Digress,
If your Description is ACCURATE: "but now I am BLOWING (looks like Old Faithful) oil out the Breather Cap" After your manifold reseal
Then you obviously have a lot of pressure in the crankcase and the most likely reason, Broken Rings or a hole in a piston.

Exhaust back pressure would not make a difference to the crankcase, That would simply impede cylinder filling on the intake stroke.

The simplest thing to do is a compression test.

finally conviced her · Joined: 14 Aug 2006 Posts: 162 Location: Lacombe, AB

Arthur · Posted: Fri Mar 26, 2010 6:57 am Post subject: Re: oil

BLOWN INCOME · Posted: Fri Mar 26, 2010 8:15 am Post subject:

if the description was a loss of rpm,fouled plug,or plugs,or smoke out the breather....then you have ring or piston hole problem..not alot of brains maybe rum... to to talk out your BEEP..how about a leakdown test...better than compression test..also tells you where your problem is..intake or exhaust or crankcase..also check to see if your oil dip stick is getting pushed out.

Itsworthit · Joined: 15 Jun 2005 Posts: 432 Location: Whitecourt

Not a lot of Brains in this forum... mostly Drunk, rich Rig pigs who don't have much of a clue. They prefer to brag about there illegal activity's!
Maybe they will get fined like these Idiots driving there truck through the river in a restricted area and then Posting it on Youtube!!

People who post statements such as these remind me of my ex wife

BLOWN INCOME · Posted: Fri Mar 26, 2010 8:26 am Post subject:

carey i hate your x wife...lol (somebody needs a little nap and a time out)

Rapid Transit · Joined: 20 Jun 2005 Posts: 206

needsaboat......is that you again? multiple personalities !

Viking502 · Joined: 23 Nov 2007 Posts: 137 Location: Alberta Beach, AB

[quote="Doogie"]Not a lot of Brains in this forum... mostly Drunk, rich Rig pigs who don't have much of a clue. They prefer to brag about there illegal activity's!

WTF!!!!
HEY Dogy. The rest of the guys on the forum are obviously too well manered to tell you, I am surprized you parents did not let you know either... YOU ARE A F*#%IN' MORON.
I am not even going to waste the time to try and explain how there are way more variables on how oil can exit valve cover breathers.

PS. I am starting to see your future...
DOGY and NEEDSABOAT sitting down together and eating a BIG
PLATE OF DINKS.

DOC · Joined: 17 Jun 2005 Posts: 329 Location: Whitecourt

What was that idiots name a few years ago, Mary or Marys Villain or somethin, christ i think in gettin alzheimers.

Bam Bam · Joined: 26 Mar 2010 Posts: 5 Location: Devon

This is a great form! After reading reading Doogie eaters post I had to join. The guy is an idiot. It is only because of this form I got the balls to buy a boat and paint the rocks on the Brazeau myself.
Thanks and keep her going!