View previous topic :: View next topic |
Author |
Message |
MOriverbum
Joined: 26 Jul 2010 Posts: 51
|
Posted: Wed Jun 20, 2012 1:21 pm Post subject: Trim tabs on a step tec |
|
|
So I have been wondering if anyone has tabs similar to these, and have ever messed with them. They came raised up about 2degrees and don't seem to do anything since they are out of the water when above 30mph. The boat doesn't have any issue with a hole shot or porpoising, just that it seems to really drag its ass deep at lower planing speeds. My question is if i would set them at about 2-3 degree down would it help to lift the ass at lower speeds without affecting higher speeds being that they are out of the water( in the step) my local dealer said" they have been set for optimum performance and not to touch them"
Description: |
|
Filesize: |
41.12 KB |
Viewed: |
17982 Time(s) |
|
|
|
Back to top |
|
|
MOriverbum
Joined: 26 Jul 2010 Posts: 51
|
Posted: Wed Jun 20, 2012 4:38 pm Post subject: |
|
|
just had a epiphany, what if I add lifting strakes inside the steps? In theory they would provide ass lift at lower speeds yet wouldnt contact the water at higher speeds?
|
|
Back to top |
|
|
conehead
Joined: 02 Sep 2009 Posts: 19 Location: Lloydminster
|
Posted: Wed Jun 20, 2012 9:06 pm Post subject: |
|
|
unless ur porpoising at higher speeds u have no need for tabs. put 2or 3 bigger dudes on back deck at full speed and if u don't porpoise u don't need tabs at all.
|
|
Back to top |
|
|
MOriverbum
Joined: 26 Jul 2010 Posts: 51
|
Posted: Thu Jun 21, 2012 4:46 pm Post subject: |
|
|
the boat rides great at higher speeds, but pigs at lower( with my flatter bottom buddys) just thought I could get some better lower speed performance without affecting top end
|
|
Back to top |
|
|
h2orescuemedic
Joined: 16 Jul 2011 Posts: 18 Location: Missouri
|
Posted: Thu Jun 21, 2012 6:29 pm Post subject: |
|
|
do you miss your delta pad boat yet? "the high window"
how about a side pic of this boat so i can say hi next time your out on the river.
_________________ 16' jet boat |
|
Back to top |
|
|
Medicine Man
Joined: 02 Dec 2010 Posts: 66 Location: Medicine River, AB
|
Posted: Fri Jun 22, 2012 9:49 pm Post subject: |
|
|
I've had tabs on a 19 ft step tech and just put them on a 16 ft 20 degree eagle delta pad. I run race nozzles with no revese, you have a place diverter so you really dont need them, but 2 degrees up is pretty much optimum. Why don't you mess with them, I did all the time, crank them up to 5 degrees and see if you porpoise a bit, you may pick up 1 or 2 mph. If you turn them down, your boat will be better at lower speeds, but you will lose some top end. Just play around with them, they do help when your turning around on river and staying up on step compared to no tab at all. Thats my two cents.
|
|
Back to top |
|
|
MOriverbum
Joined: 26 Jul 2010 Posts: 51
|
Posted: Sat Jun 23, 2012 12:07 pm Post subject: |
|
|
I do miss my delta, it seemed to ride a little higher at lower speeds. dont really miss the windshield (except when it gets chilly, but when its 100 degrees out it got too hot) but like the step tec for faster speeds, its only 4mph slower with 100 less hp. got 69 mph gps (down river) out of this with a 383, my zz502 in my delta only got 73
Description: |
|
Filesize: |
44.49 KB |
Viewed: |
17659 Time(s) |
|
Last edited by MOriverbum on Sun Jun 24, 2012 9:50 am; edited 1 time in total |
|
Back to top |
|
|
h2orescuemedic
Joined: 16 Jul 2011 Posts: 18 Location: Missouri
|
Posted: Sun Jun 24, 2012 7:41 am Post subject: |
|
|
That will be a easy boat to spot with them colors. well that is till you repaint it black and yellow
Glad your happy with your new ride, I can't wait till i find one of my own.
I was looking for you at the Gator boat poker run but never saw you. if you missed it it was a great time.
_________________ 16' jet boat |
|
Back to top |
|
|
MOriverbum
Joined: 26 Jul 2010 Posts: 51
|
Posted: Sun Jun 24, 2012 9:47 am Post subject: |
|
|
I think a some different colors are most defiantly in order!
|
|
Back to top |
|
|
|