| View previous topic :: View next topic |
| Author |
Message |
Alumaman
Joined: 26 Jul 2005
Posts: 306
Location: Whitecourt
|
 Posted: Wed Jun 11, 2008 11:23 am Post subject: WHITECOURT - MAX FUEL JET BOAT CHALLENGE 2008 |
 |
|
Advance program - subject to change.
THE "MAX FUEL JET BOAT CHALLENGE 2008"
Overall Sponsor
Max Fuel Distributors
Class Sponsors
Unlimited - Contour Construction
A Class - Carlan Services
B Class - MacRitchie Forestry Services
C Class - Highmark Wireline
D Class - Tri-jet Services
FX Class - Kehoe Marine Parts
Contacts:
Brian McGregor 780-814-4433
Karey Crawford 780-778-1465
Richard Grant 780-333-7235
Friday August 22nd, 2008
4:00 pm to 8:00pm SHOW AND SHINE
REGISTRATION AND TECH INSPECTION
(River Boat Park Whitecourt)
Saturday August 23rd, 2008
- 7:30am PANCAKE BREAKFAST (Woodlands RV & Marina - Ft. Assiniboine)
- 9:00am DRIVERS MEETING. (Woodlands RV & Marina - Ft. Assiniboine)
- 10:00am RACE LEG 1 (Fort Assiniboine to Whitecourt. Leg Distance: 104 km. 65 Mi.)
- 12:30pm DRIVERS MEETING. (River Boat Park Whitecourt)
- 1:15pm CIRCUIT RACES - LEG 2. (4 Laps, Leg Distance: 51 km. 32 Mi.)
Sunday August 24th, 2008
- 9:00am DRIVERS MEETING. (Chevron Bridge on Hw. 947)
- 10:00am RACE LEG 3 (Chevron Bridge to Whitecourt. Leg Distance: 88 km. 55 Mi.)
- 12:30pm DRIVERS MEETING. (River Boat Park Whitecourt)
- 1:15pm CIRCUIT RACES - LEG 4. (4 Laps, Leg Distance: 51 km 32 Mi.)
- 5:30pm AWARDS (River Boat Park Whitecourt)
Anyone wishing to camp Friday night in Ft. Assiniboine at the Woodlands RV & River Marina is recommended to call for reservations, 780-584-2222 or email woodlandsrvpark@telus.net
Last edited by Alumaman on Thu Jul 10, 2008 7:49 am; edited 1 time in total |
|
| Back to top |
|
 |
Pepe
Joined: 26 Jun 2005
Posts: 147
Location: Red Deer, Alberta, Canada
|
| Posted: Wed Jul 09, 2008 9:12 pm Post subject: Richard, Paddy, Brian, Karey |
|
|
Jose Barquin and Estuardo Beltran are planning to come to the race from Mexico, the only thing is that they are going to bring their SP, so my question is: There is a Class for that boats this year?
thanks
Pepe
_________________
Pepe
Sylvan Lake AB
403 887 0102 |
|
| Back to top |
|
|
Alumaman
Joined: 26 Jul 2005
Posts: 306
Location: Whitecourt
|
| Posted: Thu Jul 10, 2008 7:46 am Post subject: |
|
|
Pepe... | Quote: | | going to bring their SP, so my question is: There is a Class for that boat this year? |
yes... we had planned to run a sport jet class. At present we have only 1 or 2 "maybes" for the class. The SP's would run as D class. It will be good to see Jose and Estuardo at the race, so we'll make something work.
|
|
| Back to top |
|
|
Alumaman
Joined: 26 Jul 2005
Posts: 306
Location: Whitecourt
|
| Posted: Tue Jul 22, 2008 9:33 am Post subject: |
|
|
Poster
| Description: |
|
| Filesize: |
125.96 KB |
| Viewed: |
12451 Time(s) |
|
|
|
| Back to top |
|
|
No Bad Days
Joined: 18 Jul 2005
Posts: 73
Location: Whitecourt
|
| Posted: Fri Aug 08, 2008 9:30 am Post subject: |
|
|
Hello all Racers. This is the check list that I will be using for teching in Whitecourt. Please note the fire ext., ropes (rope with the float attached to the boat), flags and engine mounts. If your engine is 3 point mount, it has to have an engine restraint ie cable or chain to prevent engine fwd movement upon a crash. See you all in WCT.
2 paddles
1 3/8 x 50' rope with float device att. to hull
1 1/2" rope for towing
1 16"x24" red flag
1 16"x24" yellow flag
Engine restraints-3 point mounting
1 first aid kit
1 tool kit
2 5lb fire extinguishers
2 racing life jackets c/w leg straps
2 racing helmets
fuel tanks secure/grounded
throttle return spring
bulkhead/guards (if rotating parts are reachable when in seats
whistle
bail bucket
flame arrestor or breather
battery disconnect, 3"red triangle tape across from switch
fire retardant clothing
water outlets horizontal or downward
stop watch
roll bar
steering cables- center of hull or securely anchored
mufflers
4 point seat belts with quick release and tether connection between belt releases
belt cutter
Dave B. (Race Boat Captain)
|
|
| Back to top |
|
|
HIGH AND DRY
Joined: 15 Jun 2005
Posts: 176
Location: St.Albert
|
| Posted: Thu Aug 14, 2008 8:39 pm Post subject: |
|
|
| If we show up with RCI camlock style 5 point harnesses would that pass tech inspection?
|
|
| Back to top |
|
|
DOC
Joined: 17 Jun 2005
Posts: 329
Location: Whitecourt
|
| Posted: Fri Aug 15, 2008 5:36 pm Post subject: |
|
|
I dont think theres anyway to tie the camlocks together so that you can open each others, is there ? I happen to have some i can sell you.
_________________
HANG ON NUTLICKER !! |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
