| View previous topic :: View next topic |
| Author |
Message |
Topwater
Joined: 12 Aug 2006
Posts: 19
|
 Posted: Thu Aug 17, 2006 10:26 pm Post subject: FX Tunnell |
 |
|
At the circuit races in Whitecourt when the fx boats came out, the first thing i noticed was that there were 2 tunnel boats. i was always under the impression that you needed quite a bit more power than something like a zz4 produces take advantage of the whole tunnel concept. Although It was definitely working for Air Time II. Any one care to comment?
Thanx
|
|
| Back to top |
|
 |
WILSON
Joined: 17 Jun 2005
Posts: 352
Location: Mexico City
|
| Posted: Fri Aug 18, 2006 7:16 am Post subject: |
|
|
I have a tunnel and use a ZZ4, and the tunnel works fine.
This, however, is a short boat (20 ft) and some changes have been made to the original Eagle configuration. Basically, all the weight was moved about 40 cm to the back. Also, the intake of the boat was modified and pushed backwards.
The regular tunnel hull works fine with the ZZ4 but, you do have to push weight as back as possible.
That's what I can say about it.
| Description: |
|
| Filesize: |
231.57 KB |
| Viewed: |
819 Time(s) |
|
_________________
Wisdom chases me, but I´m faster |
|
| Back to top |
|
|
Kev-o
Joined: 17 Jun 2005
Posts: 625
Location: Sylvan Lake
|
| Posted: Fri Aug 18, 2006 9:30 am Post subject: |
|
|
We have two great FX boats for sale right now. A 2005 19'light weight sport chromoly roll bar, 5 point harness, dominator pump race nozzle travel cover. Just needs a ZZ4 and a trailer.
| Description: |
|
| Filesize: |
314.91 KB |
| Viewed: |
832 Time(s) |
|
|
|
| Back to top |
|
|
Kev-o
Joined: 17 Jun 2005
Posts: 625
Location: Sylvan Lake
|
| Posted: Fri Aug 18, 2006 9:39 am Post subject: |
|
|
2000 20' tunnel, berkley pump, seats, fuel tanks, roll bar, gauges, QT-100 needs a nozzle, impeller, trailer and your ZZ4 to go RACING!
| Description: |
|
| Filesize: |
235.47 KB |
| Viewed: |
877 Time(s) |
|
|
|
| Back to top |
|
|
WILSON
Joined: 17 Jun 2005
Posts: 352
Location: Mexico City
|
| Posted: Fri Aug 18, 2006 10:34 am Post subject: |
|
|
That 20' Tunnel looks good for a ZZ4 engine. Should be giving speeds on late 70's /early 80's depending on how good you are tuning the pump. Go for it!!
_________________
Wisdom chases me, but I´m faster |
|
| Back to top |
|
|
Stoker
Joined: 08 Jul 2005
Posts: 55
Location: Grande Prairie
|
| Posted: Fri Aug 18, 2006 11:04 am Post subject: |
|
|
Hey Wilson, are you running a stock ZZ4, or do you make changes to it?
_________________
Keep it Stoked! |
|
| Back to top |
|
|
WILSON
Joined: 17 Jun 2005
Posts: 352
Location: Mexico City
|
| Posted: Fri Aug 18, 2006 1:03 pm Post subject: |
|
|
Strictly Stock as it came out of the box. I haven't even removed the valve covers!
I did place a fancy MSD Ignition system and am using a 750 CFM Carburetor. I use a mechanical fuel pump and that's pretty much it.
_________________
Wisdom chases me, but I´m faster |
|
| Back to top |
|
|
Stoker
Joined: 08 Jul 2005
Posts: 55
Location: Grande Prairie
|
| Posted: Fri Aug 18, 2006 2:31 pm Post subject: |
|
|
I am running the same set up. For the FX class for worlds in Mexico are these going to be the rules no mods? I think the guys in the States change heads ect?
_________________
Keep it Stoked! |
|
| Back to top |
|
|
WILSON
Joined: 17 Jun 2005
Posts: 352
Location: Mexico City
|
| Posted: Mon Aug 21, 2006 7:07 am Post subject: |
|
|
Fx class in Mexico is defined pretty much the same as the "C" Claimer class in Canada: You can use any engine as long as it's less than 365 C.I., you use one carburetor, and use no dry sump. There is a claimer of $5000 U.S. for any engine in the class.
_________________
Wisdom chases me, but I´m faster |
|
| Back to top |
|
|
Stoker
Joined: 08 Jul 2005
Posts: 55
Location: Grande Prairie
|
| Posted: Mon Aug 21, 2006 8:58 am Post subject: |
|
|
Right on. Thanks for the info.
_________________
Keep it Stoked! |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
