| View previous topic :: View next topic |
| Author |
Message |
Seattle Jetter
Joined: 02 Aug 2006
Posts: 1
|
 Posted: Wed Aug 02, 2006 6:24 pm Post subject: WANTED: Hydraulic Trim Nozzle |
 |
|
I am trying to locate one of those Hydraulic Collars to make a race nozzle adjustable. I live in Seattle Washington and have an old Outlaw Boat. I hope I am explaining it correctly. I am talking about the ones I have seen boats at the races in Grants Pass. They are a big collar that is bolted between bowl and the steel race nozzle. I think Tim Harding made them? Anybody have one they want to sale or know where to find one?
Please contact me at seattlejetter@yahoo.com Thanks!
Mike T. |
|
| Back to top |
|
 |
JR
Joined: 23 Jul 2005
Posts: 81
|
| Posted: Wed Aug 16, 2006 1:08 am Post subject: Re: WANTED: Hydraulic Trim Nozzle |
|
|
| Seattle Jetter wrote: | I am trying to locate one of those Hydraulic Collars to make a race nozzle adjustable. I live in Seattle Washington and have an old Outlaw Boat. I hope I am explaining it correctly. I am talking about the ones I have seen boats at the races in Grants Pass. They are a big collar that is bolted between bowl and the steel race nozzle. I think Tim Harding made them? Anybody have one they want to sale or know where to find one?
Please contact me at seattlejetter@yahoo.com Thanks!
Mike T. |
What unit do you run.. As there bw no need to go Hydraulic.. We run cable trim and work very well.. Cheers JR |
|
| Back to top |
|
|
sandman
Joined: 15 Jun 2005
Posts: 260
Location: The captains table
|
| Posted: Wed Aug 16, 2006 9:10 am Post subject: |
|
|
JR,
Interested in your cable trim system, can you post a picture? Does it move the whole snoot or the steerable swivel piece? I built a system that trims a stock sportjet nozzle a few years back, but I don't think it will work on a race nozzle. That is my new quest! Race season is over, boredom is soon to set in!
_________________
It was like that when I got there! |
|
| Back to top |
|
|
JR
Joined: 23 Jul 2005
Posts: 81
|
| Posted: Thu Aug 17, 2006 12:55 am Post subject: |
|
|
| sandman wrote: | JR,
Interested in your cable trim system, can you post a picture? Does it move the whole snoot or the steerable swivel piece? I built a system that trims a stock sportjet nozzle a few years back, but I don't think it will work on a race nozzle. That is my new quest! Race season is over, boredom is soon to set in! |
Opps sorry never read that is was for a race snoot  .. But you should be able to do the same as any other nozzle that has a trim on it.. It will just have to be smallier..
I will try to get a photo of the trim nozzles that are made in New Zealand .. Cheers JR |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
