| View previous topic :: View next topic |
| Author |
Message |
Boomhower
Joined: 03 Nov 2007
Posts: 995
|
 Posted: Mon Jan 21, 2013 11:41 am Post subject: 11' EAGLE SPRINT HULL |
 |
|
SOMETHING IN THE WORKS HERE AT OUTLAW.
10'-9" LENGTH
59" BOTTOM WIDTH
69" BEAM
12 DEGREE
250 LBS
51" INSIDE WIDTH
69" COCKPIT LENGTH
$5500.00 FOR BARE HULL
| Description: |
|
| Filesize: |
147.77 KB |
| Viewed: |
39297 Time(s) |
|
| Description: |
|
| Filesize: |
174.65 KB |
| Viewed: |
39297 Time(s) |
|
| Description: |
|
| Filesize: |
180.97 KB |
| Viewed: |
39297 Time(s) |
|
|
|
| Back to top |
|
 |
Bullwinkle
Joined: 30 Sep 2011
Posts: 15
|
| Posted: Wed Jan 23, 2013 8:30 pm Post subject: SOMETHING IN THE WORKS HERE AT OUTLAW. |
|
|
| Any ideas as to what type of motor / pump would this boat be using?
|
|
| Back to top |
|
|
Bullwinkle
Joined: 30 Sep 2011
Posts: 15
|
| Posted: Wed Jan 23, 2013 8:31 pm Post subject: SOMETHING IN THE WORKS HERE AT OUTLAW. |
|
|
| Any ideas as to what type of motor / pump would this boat be using?
|
|
| Back to top |
|
|
Boomhower
Joined: 03 Nov 2007
Posts: 995
|
| Posted: Thu Jan 24, 2013 11:32 am Post subject: |
|
|
| ITS MEANT FOR A SEADOO TYPE OF POWER TRAIN. BUT THERE IS LOTS OF OTHER OPTIONS.
|
|
| Back to top |
|
|
lindsaymisan
Joined: 02 Nov 2012
Posts: 37
Location: Calgary
|
| Posted: Thu Jan 24, 2013 1:40 pm Post subject: Minimum Power |
|
|
What do you think the minimum power requirement for that boat is?
_________________
Lindsay |
|
| Back to top |
|
|
Boomhower
Joined: 03 Nov 2007
Posts: 995
|
| Posted: Thu Jan 24, 2013 5:11 pm Post subject: |
|
|
| i WOULD SAY A MINIMUM OF 130 JUST TO KEEP IT FUN
|
|
| Back to top |
|
|
smwizzz
Joined: 09 Dec 2009
Posts: 3
Location: Ft McMurray
|
| Posted: Fri Jan 25, 2013 1:10 pm Post subject: |
|
|
| Boomhower wrote: | | i WOULD SAY A MINIMUM OF 130 JUST TO KEEP IT FUN |
I built one and ran 80 HP at 37.8 MPH. It was a 9 ft boat.
On another note: What thickness is the hull constructed of? Does it have UHMW or steel plateing?
|
|
| Back to top |
|
|
GMCman01
Joined: 21 Sep 2010
Posts: 2
Location: Edmonton
|
| Posted: Fri Feb 08, 2013 9:25 pm Post subject: |
|
|
| Any ideas on pump or motor?
|
|
| Back to top |
|
|
Dale
Joined: 10 Oct 2005
Posts: 173
|
| Posted: Fri Feb 15, 2013 10:33 am Post subject: |
|
|
we are going to build a couple of these for the 215 SC rotax sea doo pump and motor. pump houseings are being made now. they will fit the 130 HP sea-doo but it has a plastic startor and steering nozzle, where the 215 is aluminum. we aren't sure if the 255sc HP pump parts will fit this housing or not?
| Description: |
|
| Filesize: |
49.76 KB |
| Viewed: |
38103 Time(s) |
|
| Description: |
|
| Filesize: |
72.17 KB |
| Viewed: |
38103 Time(s) |
|
|
|
| Back to top |
|
|
finally conviced her
Joined: 14 Aug 2006
Posts: 162
Location: Lacombe, AB
|
| Posted: Thu Feb 28, 2013 8:59 am Post subject: |
|
|
| Any updates on these pump housings? Price and availablitiy
|
|
| Back to top |
|
|
Dale
Joined: 10 Oct 2005
Posts: 173
|
| Posted: Thu Feb 28, 2013 11:18 am Post subject: |
|
|
| they are being made for us now. we should have 4 of them by March 20th, $2400 each. sounds like a lot but we couldn't built them ourselfs for less. they are made wider and longer than the SeaDoo one, so we can put a large grate in them.
|
|
| Back to top |
|
|
NO BRAKES
Joined: 20 Aug 2008
Posts: 202
Location: Edmonton, AB
|
| Posted: Thu Feb 28, 2013 12:21 pm Post subject: |
|
|
| Have you guys fabricated the intake yet?
|
|
| Back to top |
|
|
Dale
Joined: 10 Oct 2005
Posts: 173
|
| Posted: Thu Feb 28, 2013 1:27 pm Post subject: |
|
|
| they guy building them for us has built some before, and has all the jigs. Ours won't be done till mid March.
|
|
| Back to top |
|
|
finally conviced her
Joined: 14 Aug 2006
Posts: 162
Location: Lacombe, AB
|
| Posted: Fri Mar 01, 2013 10:00 pm Post subject: |
|
|
| Do you have a source for the pump parts? Or is the idea to buy and gut a sea doo?
|
|
| Back to top |
|
|
j-roc
Joined: 26 Feb 2011
Posts: 53
|
| Posted: Thu May 16, 2013 8:15 pm Post subject: |
|
|
| Any updates? This could be just the ticket!
|
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
