OUTLAW EAGLE MANUFACTURING

Gravel Gobbler · Joined: 19 Aug 2010 Posts: 2 Location: Grande Prairie

Fired up racing has a set of rewarder headers for SBC also a set of race seats if needed, want to see you racing again.

Mac McCue · Joined: 26 Feb 2012 Posts: 11 Location: Peace River,AB

The support you guys are giving us is unbelievable I want to thank everyone again you guys sure know how to brighten up a young guys life after a crash like that thanks again everyone and a big thank you Darcy Underwood for this crazy but unbelievable idea,
Mac McCue

mxracer68 · Joined: 19 Jun 2006 Posts: 38

Trim FX will get you whatever you need to rep your new rocket Mac. Give us a call with what you need. - Aaron and Jamey

Mac McCue · Joined: 26 Feb 2012 Posts: 11 Location: Peace River,AB

Here is Felix Bergerons address for all of you generous folks out there I can't explain how appreciative I am . We're going to buckle down and try to have something ready for white court . Thank you again everyone your all great people,
Mac McCue

Felix says DHL knows where he is and they deliver right to the shop

Bulls Eye Enterprises inc.
83377 Gunning Rd.
St-Isidore , Alberta
T0H3B0

Arthur · Posted: Sat Jul 21, 2012 10:48 am Post subject:

I hope anybody that wants to see new blood, or even a fan that enjoy's watching, can kick in a few bucks to help this pot reach its goal. I only wish I had the desire and cash to do this at 20.... Mac is a good kid with alot of potential to move up fast...

http://fnd.us/c/eL4fd

Mac McCue · Joined: 26 Feb 2012 Posts: 11 Location: Peace River,AB

So all you generous folks I'm heading down tomorrow to the border to get Darcys race hull that he is letting us use for whitecourt pretty excited thanks again everyone,
Mac McCue

Arthur · Posted: Wed Jul 25, 2012 8:03 pm Post subject:

I hope you can take a bunch of pics and post up a build thread Mac, it would be awesome to see and give people some ideas of what you are missing/need. Even if you email me pics every now and then, I'll get em up for you.

Mac McCue · Joined: 26 Feb 2012 Posts: 11 Location: Peace River,AB

Yes for sure lots of pictures of progress hopefully if you could fire me an e-mail so I could have yours mines mccue17@hotmail.com thanks,
Mac

Arthur · Posted: Thu Jul 26, 2012 8:00 am Post subject:

Mac McCue · Joined: 26 Feb 2012 Posts: 11 Location: Peace River,AB

In Canada on our way back to Peace River with the race hull a huge thanks to Darcy Kashuba he made this trip happen

Arthur · Posted: Fri Jul 27, 2012 10:01 pm Post subject:

KA$H MAN · Joined: 18 Jul 2012 Posts: 2 Location: Peace River

Long trip, and now the work begins!

mayo · Joined: 17 Jul 2010 Posts: 45

Back already ? Seems like you just left

TOP DAWG · Posted: Tue Jul 31, 2012 6:01 pm Post subject:

that boat gonna make Whitecourt or what ?

Will R · Joined: 31 Jul 2005 Posts: 677 Location: NWT/Alberta

Can someone put up a list of what they need and tick it off as they get it so those of us that want to help out don't end up sending stuff they already have! And Mac if you havent allready please get some seat time in this wing boat before you race it if you haven't drivin one of these wing boats! They are a little different to drive than a typical tunnel hull and a whole different animal than a V hull! Really pay attention to the wind both on water surface and vegetation on shore they'll let you know of oncoming gusts (train your navigator ) Travis hodges really knows these wing boats and would be a good guy to talk to!