OUTLAW EAGLE MANUFACTURING

Viking502 · Joined: 23 Nov 2007 Posts: 137 Location: Alberta Beach, AB

Anyone out there have a BBC (600-700HP) engine for sale.

riptear · Joined: 02 Feb 2007 Posts: 14

Sent you a PM, I happen to have what you might want.

TOP DAWG · Posted: Sun Feb 21, 2010 8:06 pm Post subject:

I have a 500 Hp, 10 : 1 comp. SBC 406, Eldelbrock Victor Jr. Heads, Crane Roller Cam, Roller Rockers, 4340 Scat Crank, H beam Eagle Rods, Forged Keith Black Pistons It has a High rise with dual 390 cfm Carbs, could easily be changed to single carb with a different intake, I do have a Mighty Deamon 750 and 850 carbs I would let go with it. It has the bell housing, the water cooled Kodiaks exhaust and a heat exchanger, water pump, alternator and starter. Will sell complete or part out. It has about 35 hrs on it now.

Will R · Joined: 31 Jul 2005 Posts: 677 Location: NWT/Alberta

how much complete?

Dale · Joined: 10 Oct 2005 Posts: 173

http://www.outlaweagle.com/forum/viewtopic.php?t=1385
that engine now has a set of 9.5:1 pistons and could have a single carb on it real easy.
and the 598 is all fresh with less than an hour.

TOP DAWG · Posted: Tue Feb 23, 2010 11:34 am Post subject:

$ 7500.00 or make me an offer I cant resist

Will R · Joined: 31 Jul 2005 Posts: 677 Location: NWT/Alberta

Felix ill trade you my 540 blower motor for it.it needs a clean up on the bottom of number 2 an 3 cylinder(never hurt the block though)a rotating assembly and an oil pan and you're off!the block is a bowtie pro stock block 10.2 deck height and 4 bolt mains.turned an A3 at 6000rpm so definatley makes some horse power all on 100LL avgas

TOP DAWG · Posted: Mon Mar 01, 2010 2:19 pm Post subject:

That sounds good to me Will

Will R · Joined: 31 Jul 2005 Posts: 677 Location: NWT/Alberta

k ill give you a shout tomorrow!are you at the shop?

TOP DAWG · Posted: Tue Mar 02, 2010 11:57 am Post subject:

I build a shop on my acreage and moved there, im 5 min from town on top of the east hill