OUTLAW EAGLE MANUFACTURING

Aluminum Squirt · Joined: 15 Jun 2005 Posts: 46 Location: Sacto, CA

1995 15' Jetcraft Sprint (marketed by Jetcraft, made by Eagle based on what I’ve been told). Chrunyk steel race nozzle on a Legend pump with B impeller. 6 point chrome moly roll cage built by Phil @ Jetstream Concepts and through bolted. Lots of SS hardware, expanded fuel tank (also built by Phil), Auto meter gauges, some liquid filled. Master battery shut off, 4 point harnesses, etc etc. Set up for FX class and will tech-in with no problem

Motor is the original SBC with the FI removed and replaced with a Holley 750. Ceramic coated Rewarder headers, duel remote oil filters, oil cooler, HEI, water pressure by-pass, motor mounted on aluminum plates and rails also fabricated by Phil. Boat has not been touched for 5 years, last time it ran it was having a large amount of blow by out the valve covers, probably some combo of rings, valve seats, etc. Have a good set of extra heads. Just add ZZ4 to start competing in FX. Probably not going to run with the tunnels on a wide open river but this thing turns and is a ball to drive. Ran over 70MPH with the approx 300 HP SBC in it, probably close to 75 with a fresh ZZ4, or make it back into a play boat. Single axle trailer with spare. A motor and paint job would make this into one hell of a play/exploring boat or go out and race for fun. Lots of potential here, hate to get rid of it but its time to consolidate a little. $7500 OBO. Located near Sacramento, CA, call Jeff @ (916)712-3419

PS-I'm not smart enough to post pictures, many available if somebody is either interested in seeing them or would be gracious enough to post them for me

Arthur · Posted: Mon Oct 26, 2009 6:50 am Post subject:

Aluminum Squirt · Joined: 15 Jun 2005 Posts: 46 Location: Sacto, CA

Thank you sir, pictures are on their way-AS

padgett114 · Joined: 23 Jun 2005 Posts: 82

Is that Denny's old boat?

finally conviced her · Joined: 14 Aug 2006 Posts: 162 Location: Lacombe, AB

What style of bottom does this boat have?

Aluminum Squirt · Joined: 15 Jun 2005 Posts: 46 Location: Sacto, CA

I don't believe it was Denny's as I don't know who Denny is. I bought it here local near Sacramento about 8 years ago. Maybe I bought it from Denny and didn't know it?

Bottom is not a Step-tech, just a bottom. I'm not real sure what a Delta pad is so I couldn't tell you if it has one but I don't think so. Looks like a regular boat bottom to me, no steps, no tunnels, and no dents-Aluminum Squirt

padgett114 · Joined: 23 Jun 2005 Posts: 82

Denny Forester out of Marysville. He used to race. I thought he had a boat that looked just like that.

Aluminum Squirt · Joined: 15 Jun 2005 Posts: 46 Location: Sacto, CA

Now that you mention the last name and location I think I know who Denny is. Rice farmer maybe.....? I don't think this was his boat unless he owned it prior to the previous owner. Anyway, its for sale. I don't want to sell it but my money tree isn't exactly growing as well as it should and I haven't touched it in years. A new house and little ones have but a few other demands on my schedule.

Lots of good parts and potential here. A motor and this would make one hell of a fun little boat or a good entry level FX boat for those of you not insisting or can't afford the latest greatest tunnel hull-Aluminum Squirt

finally conviced her · Joined: 14 Aug 2006 Posts: 162 Location: Lacombe, AB

pm sent

Aluminum Squirt · Joined: 15 Jun 2005 Posts: 46 Location: Sacto, CA

PM responded to-AS

Vegas · Joined: 20 Mar 2009 Posts: 13

ITS A GOOD LOOKIN LITTLE TUB . BUT HOW COME ITS GOT THOSE CASE TRACTOR FLAPPERS ON THE ENDS OF THE HEADERS?? Smile

Aluminum Squirt · Joined: 15 Jun 2005 Posts: 46 Location: Sacto, CA

You like those.....? One year in Marysville they were talking about having us run mufflers. I was told it didn't even have to be a muffler, just some sort of device on the header. I consulted with my sponsors and we decided the tractor flappers would work. I sort of like them now but if you want to buy it, I can have them off in a few minutes if its a deal breaker Laughing

.

Maybe you want to buy the flappers? I didn't really want to separate the package but I will for you. Flappers are $7500 OBO, comes with a free boat. Come on somebody needs a winter project. Don't make me start dropping the price-Aluminum Squirt

Aluminum Squirt · Joined: 15 Jun 2005 Posts: 46 Location: Sacto, CA

Price drop......$7000.00 OBO. Have 2 race helmets I will throw in. Its time to pay some bills-Aluminum Squirt

Aluminum Squirt · Joined: 15 Jun 2005 Posts: 46 Location: Sacto, CA

New price $6500. Somebody needs a Christmas present. I'm willing to deal but I'm not hurting bad enough to give it away so hold off on the rediculous offers for now-Aluminum Squirt

Aluminum Squirt · Joined: 15 Jun 2005 Posts: 46 Location: Sacto, CA