| View previous topic :: View next topic |
| Author |
Message |
coyotitta
Joined: 20 Dec 2005
Posts: 55
Location: Red Deer River
|
 Posted: Fri Jan 16, 2009 10:00 am Post subject: LS3 Dyno results |
 |
|
here are the results of 2 days of testing at AMS on the new LS3 Carb crate moter. this is a stock GM engine...we tried numerous different exhaust and carb set ups all testing was done with 100LL Av Gas..results are very impressive, especially note the dyno shhet with water cooled lightning exhaust.
| Description: |
|
| Filesize: |
358.04 KB |
| Viewed: |
34545 Time(s) |
|
| Description: |
|
| Filesize: |
371.34 KB |
| Viewed: |
34545 Time(s) |
|
|
|
| Back to top |
|
 |
Kev-o
Joined: 17 Jun 2005
Posts: 625
Location: Sylvan Lake
|
| Posted: Fri Jan 16, 2009 11:08 am Post subject: |
|
|
560hp all aluminum should be reliable. now lets see what the F(*&D and D%^&E boys can pull out of their crates? This is going to be one helluva class. 100+MPH for sure 
_________________
Kevin Kipling |
|
| Back to top |
|
|
Arthur
Outlaw Eagle Admin
Joined: 28 Oct 2006
Posts: 1654
Location: On the rocks
|
| Posted: Fri Jan 16, 2009 9:38 pm Post subject: |
|
|
| Very sweet #'s!!!! If there was a jealous emoticon it would be right here.....( )
|
|
| Back to top |
|
|
MISSBHAVEN
Joined: 20 Jun 2005
Posts: 310
Location: Grande Prairie, Alberta
|
| Posted: Sat Jan 17, 2009 2:43 pm Post subject: |
|
|
Anyone know if and how Dale Whitesides motor dynoed?
_________________
It's always the Navigators fault! |
|
| Back to top |
|
|
coyotitta
Joined: 20 Dec 2005
Posts: 55
Location: Red Deer River
|
| Posted: Sun Jan 18, 2009 9:57 am Post subject: |
|
|
| dales motor was off about 40 HP it had a smaller cam and fuel injection the carb version looks to be the clear winner as even GM,s numbers show the carb model 35HP ahead of the injected motor
|
|
| Back to top |
|
|
MISSBHAVEN
Joined: 20 Jun 2005
Posts: 310
Location: Grande Prairie, Alberta
|
| Posted: Sun Jan 18, 2009 4:18 pm Post subject: |
|
|
| coyotitta wrote: | | dales motor was off about 40 HP it had a smaller cam and fuel injection the carb version looks to be the clear winner as even GM,s numbers show the carb model 35HP ahead of the injected motor |
Rob, Is Dales engine the LS376/480? I realize the dyno graphs in the GMPP book are not exact, but both the LS376/480 & LS376/515 appear to have about the same hp at 5500 rpm?? How did they actually compare on AMS's dyno for hp at where they'll probably be ran at 5600-5700 rpm?
_________________
It's always the Navigators fault! |
|
| Back to top |
|
|
coyotitta
Joined: 20 Dec 2005
Posts: 55
Location: Red Deer River
|
| Posted: Sun Jan 18, 2009 4:49 pm Post subject: |
|
|
| the problem with this EFI is that it is built for the low hood clearance of the corvette and is more restrictive than the free flowing single plane manifold supplied with the carb version. from what we understand there is a taller EFI manifold available from GM for trucks as well as after market pieces that should perform better. it is doubtful any will surpass the the carb version in the rpm range that is important to jet boat racers 5000 -6000 rpm it is also tough to justify the added expense of the EFI
|
|
| Back to top |
|
|
coyotitta
Joined: 20 Dec 2005
Posts: 55
Location: Red Deer River
|
| Posted: Sun Jan 18, 2009 5:01 pm Post subject: |
|
|
| Dales motor was equal to the carb version below 5000 RPM. of intrest after our testing we jetted up the carb motor reduced the timing to 23 degrees which is the suggested pump set up and it made 515 HP just what GM said it would
|
|
| Back to top |
|
|
blowin crazy
Joined: 05 Sep 2006
Posts: 42
Location: LOG JAM
|
| Posted: Sun Jan 18, 2009 11:22 pm Post subject: |
|
|
| So what is the honest final price for the carb motor
|
|
| Back to top |
|
|
MISSBHAVEN
Joined: 20 Jun 2005
Posts: 310
Location: Grande Prairie, Alberta
|
| Posted: Mon Jan 19, 2009 12:18 am Post subject: |
|
|
| blowin crazy wrote: | | So what is the honest final price for the carb motor |
I don't know how much they are in Canada but they're $7,100 in the USA. You also have to buy either the ignition box for $360 USD or if you want to use a distributor type ignition, you have to buy a front distributor drive cover for $400 USD (plus a distributor)
http://paceperformance.com/index.asp?PageAction=VIEWPROD&ProdID=229271
_________________
It's always the Navigators fault! |
|
| Back to top |
|
|
allblowdup
Joined: 20 Jun 2005
Posts: 135
Location: Grande Prairie
|
| Posted: Tue Jan 20, 2009 1:28 pm Post subject: |
|
|
Just a note. not meaning anything by it but the density altitude on the dyno sheets changed by a bunch in 6 min. It could be the just the running of the engine may change some of this in the dyno room. The numbers would be closer if it had remained the same. Looks like a real nice engine for a Cheby anyhow. 
_________________
Right on Jesse, we got 256 rocks so far. Only 50 million more to go!!!!!! |
|
| Back to top |
|
|
RPM
Joined: 17 Dec 2006
Posts: 189
Location: Nechako
|
| Posted: Tue Jan 20, 2009 1:43 pm Post subject: |
|
|
was wondering about that too . are the the c torq and c pwr corrected so that there comparable ? were the 1 3/4 x 3" headers the ones that were on the engine in the picture of the boat ? they have a slightly higher peak torque but slightly less by 5800 , were would you rev this engine to in a race ?
_________________
Rick's Precision Machine
Prince George B.C.
Machining - Welding - Repairs |
|
| Back to top |
|
|
Coyotitto
Joined: 19 Sep 2005
Posts: 54
Location: Red Deer River
|
| Posted: Tue Jan 20, 2009 6:42 pm Post subject: |
|
|
| The tests were done on two different days which explains the density ALT difference the headers shown are 1 7/8 to 2 in steps that were very close to the lightnings in performance
|
|
| Back to top |
|
|
MISSBHAVEN
Joined: 20 Jun 2005
Posts: 310
Location: Grande Prairie, Alberta
|
| Posted: Tue Jan 20, 2009 8:07 pm Post subject: |
|
|
| allblowdup wrote: | | Just a note. not meaning anything by it but the density altitude on the dyno sheets changed by a bunch in 6 min. It could be the just the running of the engine may change some of this in the dyno room. The numbers would be closer if it had remained the same. Looks like a real nice engine for a Cheby anyhow. |
I think the time on the top right of the page is the time the sheet was printed. The actual Dyno times appear slightly lower and to the left on the page and are Jan 13/7:59 pm for the dry headers and Jan 14/12:01 pm for the Lightening Headers. Damn navigators are always gauking around instead of keeping their eyes where they should be  
Rob, the specs on the dyno sheet for the dry headers are listed as "1 3/4-3.0-16 col" which I would think means 1 3/4 primaries, 3.0 diameter X 16 inch long collectors or is that a misprint and the dry headers are 1 7/8 to 2? What are the specs on the lightening headers?
Regardless, the hp is virtually the same if the engines are ran around 5600-5900 rpm. A person might try and spin them higher to get the extra hp, but then they'll probably have to run a "D" impeller which will be crappy out of the hole and the higher rpm will also probably greatly reduce the reliability of the engines.
_________________
It's always the Navigators fault!
Last edited by MISSBHAVEN on Wed Jan 21, 2009 12:04 am; edited 3 times in total |
|
| Back to top |
|
|
Coyotitto
Joined: 19 Sep 2005
Posts: 54
Location: Red Deer River
|
| Posted: Tue Jan 20, 2009 8:36 pm Post subject: |
|
|
| we ran three different sets of dry headers the test shown here are dales which had better torque below 5500 rpm that being said there was very little difference between them. I plan to run it around 5800
|
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
