OUTLAW EAGLE MANUFACTURING

mxracer68 · Joined: 19 Jun 2006 Posts: 38

Looking for a complete marine kit (manifolds etc...) for a 350 Chevy. May also be interested in a complete marine ready 350. Phone number (780) 518-9571.

Arthur · Posted: Mon Mar 05, 2007 10:57 pm Post subject:

Hey-I've yet to put any thought into this but I do have some 383small block parts.if you were looking at building a motor,I could probably get you half way there.I had a stroker in my boat that dropped a valve and ended up just buying a crate motor to replace it.What's good is the....

CRANK-Checked by louie at AMS
Oilpan
Roller rockers
Cam and lifters(Not in original order)-probably no good
7 piston's and rods-(80hrs on all parts)
AFR heads that could be repaired...Just had a valve ram them at about 4000rpm Shocked

Flywheel
Just throwing this out there as all these parts are in my shed taking up room.May be good .....maybe more work than there worth???

Willing to part anything anyone needs Smile

TOP DAWG · Posted: Mon Mar 05, 2007 11:13 pm Post subject:

that's a mess, must have been noisy just before this happened

Arthur · Posted: Mon Mar 05, 2007 11:32 pm Post subject:

Not much of a loud bang......just a pop followed by a sudden bit of silence!I at first thought it was in the pump till I unhooked the shaft and tried to turn it by hand.Last ride of the year so turned out OK.Except for the motor replacing part...that was costly Smile

CL

mxracer68 · Joined: 19 Jun 2006 Posts: 38

Looking more for the marine parts. I'm thinking of switching to a 350 instead of my 455 olds for the weight savings. My boat is only 18 ft long and not as wide as most boats, so packing more than 4 people with any gear seems to give me some trouble. I have the olds out right now to do some work to the intake so I'm just trying to round up enough parts to do this before its ready to go back together.