| View previous topic :: View next topic |
| Author |
Message |
Jet63boat
Joined: 17 Feb 2017
Posts: 2
|
 Posted: Fri Jul 21, 2017 6:37 pm Post subject: remove wear ring on 240 sportjet |
 |
|
| I am having a problem to remove the nuts holding the steering cable where it runs thru the hole on the side of the wear ring. Does anyone know how the steering cable is fastened at the wear ring, I'm trying not to get too rough with it, thanks |
|
| Back to top |
|
 |
blen
Joined: 31 Oct 2006
Posts: 53
Location: Vancouver
|
| Posted: Sat Jul 22, 2017 1:47 pm Post subject: |
|
|
| There is a lock tab on the nut that you have to bend to free the nut.The nut is a 7/8 you will have to pull the cable back to get a socket on it if there is no room for a wrench. I welded a socket on a 9 inch piece of pipe that will slide over the cable makes it much easier. |
|
| Back to top |
|
|
shallow draft
Joined: 15 Jun 2005
Posts: 134
Location: Rocky Mountain House
|
| Posted: Thu Aug 10, 2017 6:54 pm Post subject: |
|
|
| blen wrote: | | There is a lock tab on the nut that you have to bend to free the nut.The nut is a 7/8 you will have to pull the cable back to get a socket on it if there is no room for a wrench. I welded a socket on a 9 inch piece of pipe that will slide over the cable makes it much easier. |
Great idea thanks
_________________
You are not lost if you Don't care where you are |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
