| View previous topic :: View next topic |
| Author |
Message |
rockskipper
Joined: 03 Sep 2011
Posts: 15
Location: Drayton Valley
|
 Posted: Sun Oct 02, 2011 9:27 am Post subject: Are E6's w/ delta 12 degrees |
 |
|
Are the E6 delta pads 12 degrees  If so, from what year did they start, and they still, or when did they stop bulding them with 12s.
_________________
no matter what may happen, a day on a river, beats a day on anything else.
Last edited by rockskipper on Tue Oct 04, 2011 6:50 pm; edited 1 time in total |
|
| Back to top |
|
 |
Boomhower
Joined: 03 Nov 2007
Posts: 995
|
| Posted: Tue Oct 04, 2011 7:21 am Post subject: |
|
|
As far as I know, I could be wrong, any Eagle Classic, Workhorse and some E6 Sabre's were a 12 Degree Delta. I think they were stopped being built in around 2002. The E6 and E7 was built as a "Step-Tec" from abount 1998 up to now.
The last couple Sabre E6 and E7's we have built have been a Delta Bottom. Some 16 and some 12 Degrees. This is because when using a Hamilton Jet, It does not work as well. With the step at the edge of the Keel of a step tec It does not let the water feed into the bigger intake of a Hammy. |
|
| Back to top |
|
|
rockskipper
Joined: 03 Sep 2011
Posts: 15
Location: Drayton Valley
|
| Posted: Tue Oct 04, 2011 6:43 pm Post subject: classic and workhorse |
|
|
Thanks for the past knowledge Boomhower. Never heard of a Eagle Classic or Workhorse, you'll have to tell me more about these boats.
_________________
no matter what may happen, a day on a river, beats a day on anything else. |
|
| Back to top |
|
|
buffalo bill
Joined: 26 Jan 2011
Posts: 15
Location: red deer
|
| Posted: Tue Oct 04, 2011 9:11 pm Post subject: |
|
|
hasnt been a classic built since probably 2000.looks quite similar to the one for sale under buy and sell under "divorce boat for sale". not sure about the workhorse,before my time probably
_________________
hey can you help me get this couch in my van |
|
| Back to top |
|
|
Boomhower
Joined: 03 Nov 2007
Posts: 995
|
| Posted: Tue Oct 04, 2011 10:10 pm Post subject: |
|
|
| The workhorse was an E6 Delta pad sabre built in 2000 and 01. It came with a Scott pump. |
|
| Back to top |
|
|
ntjetboater
Joined: 15 Jun 2005
Posts: 401
Location: Land of many rivers
|
| Posted: Wed Oct 05, 2011 9:22 am Post subject: |
|
|
There is a workhorse E6 running around Yellowknife..just chatted with the guy at the gas pump...23ft, scott pump, looked like a wide beam and looked like a workhorse that had been worked..lol It was at the Diavik Diamond mine for the past decade or so and was just sold at their auction.
_________________
If you ain't hittin bottom you ain't jetboatin! |
|
| Back to top |
|
|
didehcho
Joined: 04 Oct 2011
Posts: 34
Location: yellowknife
|
| Posted: Fri Oct 07, 2011 9:53 pm Post subject: |
|
|
| ya i remember that jet boat from Diavik days. The hull was dented up from just being parked at the docks and shores. Plus safety first up there and went for a cruise with the environment crew. Cruise on the open water and idled through the islands. Laughed when i saw there was clearly enough water to rip through but safety first. |
|
| Back to top |
|
|
rockskipper
Joined: 03 Sep 2011
Posts: 15
Location: Drayton Valley
|
| Posted: Sat Oct 08, 2011 8:17 am Post subject: sabre 6.1 |
|
|
yah Buffalo and Boomhower, this is the divorce boat I'm talking about, and I did some measuring from a picture and it is a 16 degree  It has stamped on it, near the serial # Sabre 6.1 will this differeniate it from an E6 Sabre
_________________
no matter what may happen, a day on a river, beats a day on anything else. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
