| View previous topic :: View next topic |
| Author |
Message |
CCRon
Joined: 27 Apr 2011
Posts: 5
Location: Lewiston, ID
|
 Posted: Wed Apr 27, 2011 5:56 pm Post subject: 1999 22' Outlaw |
 |
|
Custom Aluminum Work and Powder coating Throughout
Lavorsi Gps Speedo/Tach
Sony CD Stereo
Custom Aluminum Engine Hatch W/ Powered hatch lift
Aluminum swim decks
Fresh Tutone Paint
Snap-in-Carpet
Carbon Fiber-Look Dash and Side Panels
Hydro-Turf Interior
Berkely Intake, 9.5 Dominator Bowl, Crunik Droop Snoot, Stainless A Impeller
Fresh 572 Merlin 3 Tall Deck Block (BBC)
JE Forged Pistons
4340x4.5 Steel Crankshaft
H Beam Rods/ARP 2000 Bolts
Iron Rec. Port Heads (ported/polished) T&D Shaft Rocker Arms
Aluminum Flywheel
Hyd. Roller Comp Cam/Hardened Pushrods/ Cloyes double roller
Aeromotive Fuel Pump/Filter
Steel braided lines/ Russel fittings
MSD Ignition
Arizona Speed & Marine TPI Fuel Injection, 50lb. Injectors, 58mm Throttle Body W/ Reprogrammed ECU
Imco Power-Flo Polished Exhaust and Risers ( Thru Transom)
Eddie Marine Valve Covers/Moroso Vacuum Pump System W/Regulator, Gauge and Recovery Tank
Powder coated single axle trailer W/ Aluminum rims
Excellent Condition, used only partial summer of 2010 since completion.
Classic styling with race attitude! Will not disappoint!
$35,000 with engine
$19,500 with out engine
Call Ron 208-553-4437
Can e-mail additional pictures[img]
[/img]
| Description: |
|
| Filesize: |
100.5 KB |
| Viewed: |
13260 Time(s) |
|
|
|
| Back to top |
|
 |
NO BRAKES
Joined: 20 Aug 2008
Posts: 202
Location: Edmonton, AB
|
| Posted: Fri May 06, 2011 8:28 am Post subject: |
|
|
| any more pictures?
|
|
| Back to top |
|
|
CCRon
Joined: 27 Apr 2011
Posts: 5
Location: Lewiston, ID
|
| Posted: Fri May 06, 2011 8:43 am Post subject: |
|
|
| Yes, I do have more pictures. I couldn't get them to post? I would be more than happy to E-mail them to you.
|
|
| Back to top |
|
|
crownline
Joined: 27 May 2011
Posts: 1
|
| Posted: Fri May 27, 2011 2:50 pm Post subject: |
|
|
| any idea on HP created by motor? What is top end for this bad boy?
|
|
| Back to top |
|
|
CCRon
Joined: 27 Apr 2011
Posts: 5
Location: Lewiston, ID
|
| Posted: Fri May 27, 2011 3:38 pm Post subject: |
|
|
| The dyno sheet says 632hp/627 ft lbs @5300 I havent run the boat much,but was able to get 90 on Gps on the river. The boat has way more bottom end than it needs. I am new to the Jet pump thing, but seems like it needs a prop change? I haven't been into the pump, but was told by the previous owner it is a stainlss A impeller? and a Dominator Bowl.
|
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
