| View previous topic :: View next topic |
| Author |
Message |
gotboost
Joined: 30 Sep 2009
Posts: 41
|
 Posted: Sun Jul 18, 2010 11:17 pm Post subject: 2010 eagle exhaust |
 |
|
on my new eagle boat the have the exhaust running into a big round baffle thing is there a kit u can buy to take that big round muffler thing off so u get a bit of sound comming out and if i take this baffle thing out will it hurt my motor  |
|
| Back to top |
|
 |
Rapid Transit
Joined: 20 Jun 2005
Posts: 206
|
| Posted: Mon Jul 19, 2010 2:43 pm Post subject: |
|
|
| what engine............probably just your ears |
|
| Back to top |
|
|
gotboost
Joined: 30 Sep 2009
Posts: 41
|
| Posted: Mon Jul 19, 2010 3:04 pm Post subject: |
|
|
| its a 350 chevy |
|
| Back to top |
|
|
Arthur
Outlaw Eagle Admin
Joined: 28 Oct 2006
Posts: 1654
Location: On the rocks
|
| Posted: Mon Jul 19, 2010 3:19 pm Post subject: |
|
|
| If your looking for a uniuqe sound, tape a hockey card to your flywheel. |
|
| Back to top |
|
|
Kev-o
Joined: 17 Jun 2005
Posts: 625
Location: Sylvan Lake
|
| Posted: Mon Jul 19, 2010 5:06 pm Post subject: |
|
|
A beer can rubbing on the flywheel sound unique as well!
Kev-o
_________________
Kevin Kipling |
|
| Back to top |
|
|
big block
Joined: 09 Jun 2008
Posts: 102
Location: calgary
|
| Posted: Mon Jul 19, 2010 5:35 pm Post subject: |
|
|
um no it will not hurt the engine, no there is no kit, took mine out of my boat and then ran stright off the manifolds out the back to 4 inch tips, cut two new holes and welded up the old holes, depending if you engine is efi or carb you might want to tune it after you open up the exhaust.
hum how do beer cans make it to the flywheel  |
|
| Back to top |
|
|
RPM
Joined: 17 Dec 2006
Posts: 189
Location: Nechako
|
| Posted: Tue Jul 20, 2010 11:01 pm Post subject: |
|
|
why take it off ? they don't rob much or any hp and they sound smooth .
_________________
Rick's Precision Machine
Prince George B.C.
Machining - Welding - Repairs |
|
| Back to top |
|
|
boosted
Joined: 04 Jun 2009
Posts: 378
|
| Posted: Wed Jul 21, 2010 8:08 am Post subject: |
|
|
Actually I am pretty sure that the tube is worth a couple of hp better than the straight exhaust.
_________________
Mark
Lets go back I think we missed one rock! |
|
| Back to top |
|
|
JET1
Joined: 03 Jun 2010
Posts: 42
|
| Posted: Wed Jul 21, 2010 10:59 am Post subject: |
|
|
lol i have a little story about this back when i was younger i had a stepside pickup truck with a 350 that i added performance parts to when ever i had extra money it had a 4 speed the cam made it sound choppy and rough i changed the exhaust to 3 inch with race mufflers and then i put 4.11 rear end in it that thing sounded so sweet driving around my home town shifting gears rattling windows as i went by. then i went to collage and when i came home on weekends it was a 2 hour drive and 2 hours of WHAAAAAAAAAAAAAAAAA at 3500 rpm will drive you insane
be carefull what your asking for wanting to make it "sound better" |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
