| View previous topic :: View next topic |
| Author |
Message |
Black Fly
Joined: 26 Jun 2005
Posts: 11
Location: Edmonton, AB
|
 Posted: Wed Sep 28, 2005 9:42 pm Post subject: Cracked Intake |
 |
|
Finally found out why I was taking on water. There is a crack in the intake, just in front of the pump. I figure I have two options: leave it and make sure my bilge pump is functional, or pull the motor and pump and have the crack fixed up. Are there any other options?
It doesn't leak much (small trickle), but I don't want to leave the boat on the water overnight. Also, I am not sure if the crack will spread or lengthen.
The intake is on an Eagle Sabre, with an SD-309 pump.
| Description: |
|
| Filesize: |
59.78 KB |
| Viewed: |
10657 Time(s) |
|
|
|
| Back to top |
|
 |
Kev-o
Joined: 17 Jun 2005
Posts: 625
Location: Sylvan Lake
|
| Posted: Thu Sep 29, 2005 6:39 am Post subject: |
|
|
| Blackfly, the season is drawing to a close you might be alright for a little while but the crack will worsen. With winter sneaking up on us there is a perfect time to yank the motor etc.. and fix the intake properly, maybe even straighten the bottom a little and do a good once over! kEV-O
|
|
| Back to top |
|
|
WILSON
Joined: 17 Jun 2005
Posts: 352
Location: Mexico City
|
| Posted: Thu Sep 29, 2005 7:43 am Post subject: |
|
|
By all means, fix it. Probably you donīt have to take out the engine and still have access to the crack by just removing the jet drive. For an emergency, use fiberglass to cover the crack, but this is only for the purpose of leaving the boat in the water overnight.
_________________
Wisdom chases me, but Iīm faster |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
