OUTLAW EAGLE MANUFACTURING Forum Index OUTLAW EAGLE MANUFACTURING
ALUMINUM BOAT FORUM
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

Merc Sportjet Impeller

 
Post new topic   Reply to topic    OUTLAW EAGLE MANUFACTURING Forum Index -> OE GENERAL FORUM
View previous topic :: View next topic  
Author Message
tuchodi



Joined: 04 Oct 2007
Posts: 2

PostPosted: Thu Oct 04, 2007 5:59 pm    Post subject: Merc Sportjet Impeller Reply with quote

Has anyone used the Solas 4 blade SS impeller in their 175 Sportjet. I have talked to a couple of guy's that have bought on from Merc but it is very expensive compared to Solas.
Back to top
View user's profile Send private message
shallowman



Joined: 03 Apr 2006
Posts: 199

PostPosted: Fri Oct 05, 2007 5:43 pm    Post subject: Solas impellers Reply with quote

to answer your question I have tried the solas impeller and found that it is not as good a 4 blade stock it was not as fast out of the hole and top end was slower by 2 mphr mid range was good maybe just a little better than stock but not much and this was on a 200 opiti max
if you want good mid range just build up your 3 blade until the rpm's come down a little ,like 50 rpm then that will be the best
beleave me when I say I have tried it all

Let'er Buck
Back to top
View user's profile Send private message
tuchodi



Joined: 04 Oct 2007
Posts: 2

PostPosted: Sat Oct 06, 2007 10:01 am    Post subject: Reply with quote

shallowman: When you say build up the impeller do you extend the trailing edge to hold the water longer like we did on the Burkley pumps
Back to top
View user's profile Send private message
shallowman



Joined: 03 Apr 2006
Posts: 199

PostPosted: Sun Oct 07, 2007 10:24 am    Post subject: impeller Reply with quote

Yes that is correct I had it built up almost quarter of a inch before it started to bring the rev's down now my rpm is 50 below stock and mid range is much faster for the same rpm then before and just alittle on top end
I know a fellow who owns a 16 lynx and he claims 3 mpr in mid range with a 3/16 build up with a 240 hp

Let'er Buck
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    OUTLAW EAGLE MANUFACTURING Forum Index -> OE GENERAL FORUM All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group :: Spelling by SpellingCow.