OUTLAW EAGLE MANUFACTURING Forum Index OUTLAW EAGLE MANUFACTURING
ALUMINUM BOAT FORUM
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

kodiak lsa upgrade?

 
Post new topic   Reply to topic    OUTLAW EAGLE MANUFACTURING Forum Index -> OE GENERAL FORUM
View previous topic :: View next topic  
Author Message
boosted



Joined: 04 Jun 2009
Posts: 378

PostPosted: Wed Nov 27, 2013 9:24 am    Post subject: kodiak lsa upgrade? Reply with quote

Is there any supercharger pulley upgrade kits that fir the kodiak LSA that do not require any ECU tuning? Was only thinking of going 5% od.
_________________
Mark

Lets go back I think we missed one rock!
Back to top
View user's profile Send private message
Dale



Joined: 10 Oct 2005
Posts: 173

PostPosted: Wed Nov 27, 2013 10:59 am    Post subject: Reply with quote

We make one in town here. we tried a couple of the other ones out there, they all needed ECM work. Which we did, never worked out good. Then we had a pulley made, +1.5 PSI no ECM changes. better fuel economy at mid range and about 100 RPM on a HJ212 4.1KW at WOT. 200RPM on a AT309

$410. with a new belt
Back to top
View user's profile Send private message
boosted



Joined: 04 Jun 2009
Posts: 378

PostPosted: Wed Nov 27, 2013 2:38 pm    Post subject: Reply with quote

Thanks Dale. Is that a crank pulley or supercharger pulley?
_________________
Mark

Lets go back I think we missed one rock!
Back to top
View user's profile Send private message
Dale



Joined: 10 Oct 2005
Posts: 173

PostPosted: Wed Nov 27, 2013 5:47 pm    Post subject: Reply with quote

Super charger pulley, the chank pulley is part of the balancer. You will destroy the stock pulley getting it off and GM does not have a replacement for it either. so there is no going back. We've done about 14 of these so far, no need to go back.
Back to top
View user's profile Send private message
boosted



Joined: 04 Jun 2009
Posts: 378

PostPosted: Wed Nov 27, 2013 8:07 pm    Post subject: Reply with quote

Ok thanks. Lingerfelter and metco both have a crank pulley kit but yes it is a new balancer as I know how hard it is to get them of without wrecking them. This definetaly sounds like the best way to go. Ill give you guys a call soon.
_________________
Mark

Lets go back I think we missed one rock!
Back to top
View user's profile Send private message
tuchodi51



Joined: 01 Aug 2006
Posts: 97
Location: fort st john

PostPosted: Wed Nov 27, 2013 9:45 pm    Post subject: Reply with quote

I am also interested. Not in the loop. What company? Or individual do I contact?
Back to top
View user's profile Send private message Send e-mail
Arthur
Outlaw Eagle Admin


Joined: 28 Oct 2006
Posts: 1654
Location: On the rocks

PostPosted: Thu Nov 28, 2013 8:18 am    Post subject: Reply with quote

Bernie or Dale
1-403-347-4565
Back to top
View user's profile Send private message
skimmer



Joined: 27 May 2011
Posts: 48
Location: Alberta

PostPosted: Thu Nov 28, 2013 8:37 am    Post subject: Reply with quote

boosted wrote:
Ok thanks. Lingerfelter and metco both have a crank pulley kit but yes it is a new balancer as I know how hard it is to get them of without wrecking them. This definetaly sounds like the best way to go. Ill give you guys a call soon.


Mark, can you include me in your plans or your orders please ?
Back to top
View user's profile Send private message
boosted



Joined: 04 Jun 2009
Posts: 378

PostPosted: Thu Nov 28, 2013 9:03 am    Post subject: Reply with quote

Arthur wrote:
Bernie or Dale
1-403-347-4565


just give these guys a call. That what ill be doing.

_________________
Mark

Lets go back I think we missed one rock!
Back to top
View user's profile Send private message
Smoke Show



Joined: 05 Oct 2011
Posts: 77
Location: Fort Nelson, BC

PostPosted: Thu Nov 28, 2013 12:24 pm    Post subject: Reply with quote

how long have you guys been running these for? any downside?
_________________
2014 18' Ali-Craft LSA/212
Back to top
View user's profile Send private message
Dale



Joined: 10 Oct 2005
Posts: 173

PostPosted: Thu Nov 28, 2013 2:12 pm    Post subject: Reply with quote

We have 3 years in on these with no issue's. We started with the Lingerfelter ones, lots of problems with trying to get the ECM dialed in, never did get it. We haven't seen a down side yet but if you were to run reg gas or get some bad fuel there could be some problems. Also running at WOT at sea level or on cold days you might have some detonation. Common sence with the throttle will always keep things running longer and better.
Back to top
View user's profile Send private message
Smoke Show



Joined: 05 Oct 2011
Posts: 77
Location: Fort Nelson, BC

PostPosted: Fri Nov 29, 2013 1:47 pm    Post subject: Reply with quote

do you guys run 94 or 91/92?

common sense with a throttle is not my strong point....

_________________
2014 18' Ali-Craft LSA/212
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    OUTLAW EAGLE MANUFACTURING Forum Index -> OE GENERAL FORUM All times are GMT - 6 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You can download files in this forum


Powered by phpBB © 2001, 2005 phpBB Group :: Spelling by SpellingCow.