OUTLAW EAGLE MANUFACTURING

https://forums.outdoorsdirectory.com/forum/alaska-boating-forums/alaska-power-boating/110115-papd-optimax-drain-kit

After a little thought there is a drain hole in the adapter plate just in front of the exhaust risers. Its a small hole prone to plugging that I think people drill out a little larger.

Little water left in there froze and pushed gasket out over the winter. Simple job you need to pull the engine and replace gasket. Hopefully you can get a chain hoist and lift the engine enough to sli ...

Website https://marineecurepair.com/

Jeff. Sent my 240 Motorola ECU to a place called Marine ECU repair in Colorado.
(service@marineecurepair.com) . They diagnose and repair. Sent it last week should be back tomorrow or next. Mine was d ...

Twin 115's on a 19 footer, should scoot ?

T.P.S ?

There is a lock tab on the nut that you have to bend to free the nut.The nut is a 7/8 you will have to pull the cable back to get a socket on it if there is no room for a wrench. I welded a socket on ...

Plugs ,fuel filter, alt belt (every year) keep a spare coil , fuel lift pump, plugs, alt belt and oil tank filter with you.

Reeds are on the front of the motor behind the intake air horn . Pulling the motor is not necessary unless you have a bulkhead really close to the intake. The reeds in a 240 are composite and not meta ...

Offer one with a outboard pod at the back ,very popular.

Sounds like a stator if you dont have any fuel issues.

Yes they will be the same,

Check that the reverse gate is clear of the nozzle and if good go over your pump to haul seal with a fine tooth comb any leaks on the seal and it will cavitate like crazy.