OUTLAW EAGLE MANUFACTURING

Do you guys at Outlaw eagle keep pictures of the hulls you sell? i'd like to have a picture of my boat before it got re-painted. it's a 1999 outlaw eagle deltapad 21' HW sport 1999 I think it was whi ...

As my water separator says it filters down to 21 microns, i guess i'll just delete de fuel filter.
Thx

Hi guys, have a 502 in a deltapad wich has a water separator and an in line fuel filter one after the other. Just can't figure why i have both. I feel like just the water separator should do the job.. ...

Need an o-ring on my sd-309 for the hand hole. if anyone has an advice on where i can find one for cheap. I am in Quebec, Canada
Thanks

You were right Gent911, these are largely used on GM cars, and they were not metric but standard.
I had a real hard time getting the whole thing aligned to fit the splines in place, but finally got ...

did as you said but had to tear the hole thing apart, even the bellhousing from the engine to be able to reach.....A pain in the......
Thanks for the info.
Now i need an equivalent...perhaps in the ...

Never done that so....correct me if i'm wrong......
Need to replace both universal joints, on my outlaw deltapad with a 502BBC and an AT SD309
so i guess i have to remove the pump to get access to ...

I have a closed cooling system, and the ball valve is there to regulate (if need is ) the fresh water flow to the water injected exhaust and heat exchanger

agreed for the over greasing, just got the boat last fall, haven't had time to go throught everything yet, there is still a few dirty spots to clean, and mods to be done.

Thanks for the info.

Hi guys.
I'm fairly new to the jetboat world.
Figured out how to oil and grease everything, except the universal joint on my AT SD-309. Is there an already existing grease fitting for this, or do i ...

Is there a fix for the SS impeller rattle when engine is idling, and if so, what is the best way to fix it.

Pump is an A/T sd309

I finally bought a 21 foot deltapad, thanks for all the inputs guys

Just sell it to me and you won't have to worry about that anymore.

As i live in Quebec, Canada, there is not much chance for me to enventually have a ride in the 3 types of hull talked above but Thanks for the inputs anyway
Too bad there is not much of these around ...

Thanks for the input.
Here is my story: I already have an outboard fiberglass speedboat (old sunray ss150 with a 85hp that does 50 Mph), and would like to have the same kind of sport ride but bigger ...