OUTLAW EAGLE MANUFACTURING

Great thanks! Now can anyone help me out with choosing the right cam. I'm overwhelmed with all the different grinds and the info I have read. What will give me the best low end torque? and what hav ...

I got my hands on a 5.3L engine for nothing, originally planning on buying a 5.7L. I don't hear of many 5.3 engines being used so I am wondering if they will bolt up to an AT SD309 pump. I currently h ...

Alright I just wanted to make sure. It was an ugly set up with an unnecessary amount of slack in the lines. I just want to shorten them up and raise them but keep the routing the same

So you're saying the hoses need to droop lower than the exhaust inlet?

I recently had a cooling failure from a hose rubbing on the bottom of a pulley on the front of the engine. Uckily I had the engine compartment open during startup and saw the spray. The hoses were p ...

Sorry, the $4000 was new shaft assembly as well. But still, after 20 hours its hard to stomach. I called up Kehoe Marine and I'm taking my problems there.

I wrote an earlier post about my pump slipping. I brought it in for service in Gibbons. What I got from them is there were rocks jammed in between te impeller and wear ring causing it to jam and event ...

Yes I am in Fort Mac. Alignment looks good.

I Spoke to the service department in gibbons who rebuilt my pump in the fall and installed a new u-joint who claims there is only one option for u-joints and the one they used is good for 1000+hp race ...

I took the bowl off, which was simple like you said. The impeller is still intact with the shaft, but I can turn the impeller by hand and the u-joint is not moving which tells me the sPlines are gone. ...

Thanks for the help Arthur! I will let you know what I find

I am wanting to do that, just unsure about the bearings and seals in the bowl. If I unbolt the bowl will it slide right off and allow me to work on the impeller?

Yeah maybe you're right. Is part of the key visible or is it hidden under the impeller?

I have an SD-309 pump with only 20 hours on it since a complete rebuild. Also coupled to a new u-joint. The other day I cruised up the Clearwater, did some fishing, and when I was going to head home ...